Verschiedenste Artikel von Karl Zeilhofer

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.

====== SCPI Scripts on Linux Mint ======

Here I will describe a simple solution to control two units of programmable power supplies via Ethernet. 

===== Setup =====
  * 2 Units, Rigol DP832 with Ethernet (LXI) Extension installed
  * Notebook running Linux Mint 17.3
{{ ::both_power_supplies.jpg?direct&600 |}}

===== Ethernet Config =====
First the Ethernet interface on the RIGOLs has to be configured. We have to use fixed IP-addresses so our scripts then will work every time we want to use them. 

{{ ::rigol_ethernet_setup.jpg?direct&600 |}}

===== Configure Nemo on Linux Mint =====
The goal is to have shell scripts, which can be run with a double-click. \\
{{ ::2017-01-04_001.png?direct&600 |}} \\
For this Nemo's config has to be changed, so we don't get annoying dialogs: \\
{{ ::2017-01-04_002.png?direct&600 |}}

===== The Scripts =====
For the shell scripts we use netcat (short nc), which makes a raw TCP connection to the SCPI-Server (the RIGOL instrument). Netcat gets the SCPI command via echo and a pipe. \\
{{ ::2017-01-04_003.png?direct&600 |}} \\

To make a script runnabla/clickable, we have to give it the permission via right-click, Properties:
{{ ::2017-01-04_004.png?direct&600 |}}

===== Downloads =====
{{::rigol-dp832-scripts.zip|}} (don't forget to make them executeable)


{{tag>english script scpi electronics ethernet linux remote_control article software}}

Verschiedenste Artikel von Karl Zeilhofer

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge