Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- snaiks-study [2017/03/17 09:22] – ↷ Seitename wurde von snaiks auf snaiks-study geändert dokuwikiadmin
+++ snaiks-study [2024/09/19 12:16] (aktuell) – dokuwikiadmin
@@ Zeile 1: / Zeile 1: @@
-====== Snaiks ======
+====== Snaiks Study ======
-**Signals and Systems from KiCad to C++**
+**Signals and Systems from KiCad to Cpp**
 {{ ::snaiks-logo.png?nolink&200|}}
-.4.2016
+.4.2016\\
+For Updates please see [[Snaiks]]
 ----
@@ Zeile 9: / Zeile 10: @@
 ===== Introduction =====
-Signals and Systems is here a collection of C++ classes on one hand, and a collection of corresponding KiCad components on the other hand.
+Signals and Systems is here a collection of Cpp classes on one hand, and a collection of corresponding KiCad components on the other hand.
-It's purpose is to create complex systems by drawing them in KiCad's schematic editor and generate out of the netlist a working C++ code, which also compiles for micro controllers without dynamic memory allocation.
+It's purpose is to create complex systems by drawing them in KiCad's schematic editor and generate out of the netlist a working Cpp code, which also compiles for micro controllers without dynamic memory allocation.
 It can be used to implement PLCs or digital signal processing like filtering.
-The C++ classes are based heavily on templates, so most of the components can be used either for floating point or for integer calculations.
+The Cpp classes are based heavily on templates, so most of the components can be used either for floating point or for integer calculations.
 ===== Goals =====
-  * Generate beautiful C++ code from a KiCad schematic
+  * Generate beautiful Cpp code from a KiCad schematic
   * Compiles without dynamic memory allocation (embedded, savety)
   * Read and write system states during runtime (e.g. with a simple terminal)
@@ Zeile 117: / Zeile 118: @@
 It should be possible to combine a set of systems to a sub-system, where new inputs and outputs are defined.
-KiCads hierarchical schematic structure could be used out of the box, but in C++ we do not see anything from this. Similar to the KiCad PCB layout, which also doesn't know anything about a hierarchical sheets. Altium Designer has the so called rooms, which group and synchronize footprint arrangement and traces between multiple instances of one hierarchical sheet.
+KiCads hierarchical schematic structure could be used out of the box, but in Cpp we do not see anything from this. Similar to the KiCad PCB layout, which also doesn't know anything about a hierarchical sheets. Altium Designer has the so called rooms, which group and synchronize footprint arrangement and traces between multiple instances of one hierarchical sheet.
 For the systems we should make something similar to the properties, which live in a SnsPropertyContainer. We should make a SnsSystemContainer, which provides on one hand memory for the different objects of a sub-system and on the other hand new inputs and outputs.
@@ Zeile 133: / Zeile 134: @@
 === Proposal ===
-  * in cases, where this is really needed, a specific C++ class could be implemented
+  * in cases, where this is really needed, a specific Cpp class could be implemented
   * mixture of numbers and bool shouldn't be any problem
-{{tag>english software signals kicad snaiks}}
+{{tag>english software signals kicad snaiks technical}}