Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- ad7190:quad-delta-sigma-board [2016/02/24 16:17] – karl
+++ ad7190:quad-delta-sigma-board [2016/03/31 16:13] (aktuell) – [Downloads] dokuwikiadmin
@@ Zeile 22: / Zeile 22: @@
 ===== Configuration =====
 {{ :ad7190:2016-02-22_002.png?direct&600 |}}
+===== Assembled Board =====
+Here the blue wire was needed to supply the Arduino with 5V, because the USB-connector had an up-bent leg before soldering, and therefore the V+ pin was not connected to the Arduino-PCB. When I fixed this, I removed the blue wire.
+{{ :ad7190:dsc_1080.jpg?direct&300 |}}
+R-Core transformer, 230V to 2x 9V. This type of transformer has the least capacitive coupling. It's good to avoid common mode currents.
+{{ :ad7190:dsc_1082.jpg?direct&300 |}}
+Here a close up of the board:
+{{ :ad7190:dsc_1084.jpg?direct&300 |}}
+Between the transformer and the ADC-board there is the [[:uln-power-supply|Ultra Low Noise Linear Power Supply, using LT3042]]
+{{ :ad7190:dsc_1085.jpg?direct&300 |}}
+===== Downloads =====
+  * {{:ad7190:kicad-quad-delta-sigma-1.0.7z|KiCad Project, V1.0}}
+  * {{:ad7190:quad-delta-sigma-board-v1.0.pdf|Schematic, V1.0}}