Benutzer-Werkzeuge

Webseiten-Werkzeuge


chair_-_manned_multirotor_quadcopter

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
Letzte Überarbeitung Beide Seiten der Revision
chair_-_manned_multirotor_quadcopter [2017/06/26 12:17]
karl [Specs]
chair_-_manned_multirotor_quadcopter [2017/06/26 20:56]
dokuwikiadmin [Construction]
Zeile 8: Zeile 8:
   * **Flightcontrol:** 5x KK 2.1 running stock 1.6 firmware   * **Flightcontrol:** 5x KK 2.1 running stock 1.6 firmware
   * **Motors:** 76x Multistar Elite 5010 274Kv   * **Motors:** 76x Multistar Elite 5010 274Kv
-  * **Motor Controlelrs:** 76x afro 20A HV ((with one extra 63V 330uF low ESR capacitor fitted to each ESC to handle the long current path from battery to ESC))+  * **Motor Controllers:** 76x afro 20A HV ((with one extra 63V 330uF low ESR capacitor fitted to each ESC to handle the long current path from battery to ESC))
   * **Propellers:** 17x5 or 18x5.5 Quanum DJI style CF ((432mm/5° or 460mm, 5.5° pitch)) ((In Video Part 16, he speaks about 17"x5°, 18x5.5 is from his comment on the motors, see [[#motors]]))   * **Propellers:** 17x5 or 18x5.5 Quanum DJI style CF ((432mm/5° or 460mm, 5.5° pitch)) ((In Video Part 16, he speaks about 17"x5°, 18x5.5 is from his comment on the motors, see [[#motors]]))
   * **Batteries:** 80x Multistar 4S 5.2Ah, 6.18kWh ((4 modules: 20 pieces of 5.2Ah,4S; first 2 of these in parallel, then in series -> 5 groups in each with 8S,10.4Ah))   * **Batteries:** 80x Multistar 4S 5.2Ah, 6.18kWh ((4 modules: 20 pieces of 5.2Ah,4S; first 2 of these in parallel, then in series -> 5 groups in each with 8S,10.4Ah))
Zeile 15: Zeile 15:
     * Vehicle: 58kg excl. batteries     * Vehicle: 58kg excl. batteries
     * Battery: 35kg     * Battery: 35kg
-  * **Load:** Tested with 93kg ((https://www.youtube.com/watch?v=v78LQJQF7yk)+  * **Load:** Tested with 93kg ((https://www.youtube.com/watch?v=v78LQJQF7yk))
  
 ===== Construction ===== ===== Construction =====
   * Aluminum tubing 6063 T6   * Aluminum tubing 6063 T6
   * Aluminum rod 6082 T6   * Aluminum rod 6082 T6
-  * 500 pound break kevlar rope+  * 4.5kN break kevlar rope for Chair
   * Bridge nylon 3D printed parts   * Bridge nylon 3D printed parts
   * Aluminum pop rivets   * Aluminum pop rivets
  
 +===== Battery =====
 +  * 80 packs, each 5.2Ah, 4x3.7V
 +  * 4 sub assemblies
 +  * super plugs with 15 XT60 connectors, forced by a screw with bearring
 +  * each pack is balanced individually
 ===== Charger ===== ===== Charger =====
   * 20x Turningy 35W balance chargers   * 20x Turningy 35W balance chargers
Zeile 60: Zeile 65:
 The motors are tilted by 6° to get a better handling, see video part 18.  The motors are tilted by 6° to get a better handling, see video part 18. 
  
 +==== Redundancy ====
 +My assumption: \\
 +Electrically the whole thing is split into 5 more or less equal quadrocopters
 +  * 5 remote controlls, potentiometers on a DIY 3D-Printed Joystick, mechanically couppled
 +  * 5 RC receivers
 +  * 5 Flight controllers
 +  * 76 Motors: Each of the 4 "super rotors" has 19 Motors, where 4 flight controllers controll 4 motors, and 1 flight controller controlls 3 motors. 
  
 ===== Videos ===== ===== Videos =====
Zeile 76: Zeile 88:
   * [[https://www.youtube.com/watch?v=JysS4d8trk4|Part 16 - Construction and Tools]]   * [[https://www.youtube.com/watch?v=JysS4d8trk4|Part 16 - Construction and Tools]]
   * [[https://www.youtube.com/watch?v=2yG4nbLRG3k|Part 15 - Charger, Battery Connectors, Chair]]   * [[https://www.youtube.com/watch?v=2yG4nbLRG3k|Part 15 - Charger, Battery Connectors, Chair]]
 +
 +{{tag>english technical quadrocopter flight project}}
  
chair_-_manned_multirotor_quadcopter.txt · Zuletzt geändert: 2017/06/30 07:48 von karl